|
|
|
 |
Model EB-10
Bench mount production machine for small shops who work with straight and contour boards. The Top & Bottom motorized auto flush trim station & industrial heater are the same as EB-25.
Max. thickness of tape: 0.04" or 1.00 mm.
Max. board thickness; 2.56" (65 mm)
Min. board thickness: 7/16" or 0.43", (11 mm)
No need for compressed air.
Electronic temperature control.
Heats up to 900ºF (500Cº) in less than 2 minutes.
Auto end cut with 1/4" extra end over hang Flush trim with RC21E (end trimmer)
Foot pedal end cut for contour panels
Min. degree of radius: 60º
Min. interior radius:1.25" (30mm)
Max.: unlimited
Optional auto belt feeder
Remove trim station to band curved panels
Extended front fence will hold large work
and make it easy to move panel through
220 V, 15 AMP, single phase
Weight: 77 Pounds, 35 Kg
Dimensions: 23.6 x 37.4 x 17.0 inches (600 x 950 x 430mm).
|
|
 |
EB10 is also available with factory mounted power feeder.
The speed of this feeder is variable. But we recommend you fix it at 15 feet per minute, and find out the right temperature for the brand that you use. The machine is packed in a crate with gross weight of 100 pounds, and net weight of 70 Pounds.
|
|
 |
Silicon-free non-stick spray prevents glue build up. Silicon-free for use in cases of laquering or using prefinshed tapes and boards 11.5 OZ (400 ML)
|
|
|
